Taiwan Semiconductor's TLD5S/6S/8S series load-dump TVS devices offer high-power surge capability and are ideal for transient surge protection.
By Taiwan Semiconductor 3044
Toshiba’s DF2SxxP2 series is suitable for protecting power supply lines for mobile applications, consumer equipment, and industrial equipment.
By Toshiba Semiconductor and Storage 786
Nexperia offers outstanding protection against transient overvoltage for mobile phones with three product series in the PTVS portfolio.
By Nexperia 1276
Cantherm's MF73T-1 series power NTC thermistors provide inrush current suppression for sensitive electronics.
By Cantherm 1278
Bel Fuse's fast-acting fuse features improved surge withstand performance with broad amperage range from 2 A through 50 A in a small 1206 package size.
By Bel Fuse Inc 1248
Panasonic's ERB-R series microchip fuses are used to sense and protect against unwanted increases in circuit current caused by overloads or short circuits.
By Panasonic 1250
Semtech's µClamp® TVS diodes offer high ESD surge capability making them ideal for portable applications such as cellular phones and tablet PCs.
By Semtech 1724
The Murata safety recognized capacitor series GA3 (GB), (GD), and (GF) are SMD type with high capacitance in smaller case size.
By Murata Electronics 1700
Yageo offers a wide range of metal film and wire wound fusible through-hole resistors.
By Yageo 3448
TDK's CGA series multilayer ceramic chip capacitors (MLCCs) are qualified to the automotive industry’s Q200 test standard.
By TDK Corporation 865
Murata's ceramic chips offer better reliability, electrical performance, and allow design engineers to downsize designs with various package options.
By Murata Electronics 1253
Bourns PortNote® solution illustrates how a polymer PTC can protect the DC bus during short circuit testing as recommended by USB 3.1 Section 11.4.1.1.1.
By Bourns Inc. 797
MikroElektronika MikroBUS™ click boards are plug-in play solutions designed to revolutionize the way users add new functionality to development boards.
By MikroElektronika 1021
The APM self-sealing nuts seal to 20,000 psi and fasten where gas or liquids are present or under pressure.
By APM Hexseal 1693
APM Hexseal's push-button boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
By APM Hexseal 1667
APM Hexseal's E-SEEL® rocker switch boots are molded from RUBRGLAS™ and feature a continuous sealing rib at their base to fully enclose the switch bezel.
By APM Hexseal 1653
APM Hexseal's stainless-steel bushing seal was designed to control potential leakage with its bonded silicone exterior.
By APM Hexseal 1631
APM Hexseal's self-sealing screws are designed to seal to 20,000 psi and are reusable and compatible with all surface finishes.
By APM Hexseal 1815
APM Hexseal's rotary shaft seals for potentiometers feature a molded in mounting-nut and choice of IP66/68 rated models.
By APM Hexseal 1569
APM Hexseal's SEELOC®, high-pressure washers are easy to install and their uniformity and high strength assure repeatable performance.
By APM Hexseal 1742