Panasonic's ERB-R series microchip fuses are used to sense and protect against unwanted increases in circuit current caused by overloads or short circuits.
By Panasonic 111
Semtech's µClamp® TVS diodes offer high ESD surge capability making them ideal for portable applications such as cellular phones and tablet PCs.
By Semtech 178
The Murata safety recognized capacitor series GA3 (GB), (GD), and (GF) are SMD type with high capacitance in smaller case size.
By Murata Electronics 246
Yageo offers a wide range of metal film and wire wound fusible through-hole resistors.
By Yageo 661
TDK's CGA series multilayer ceramic chip capacitors (MLCCs) are qualified to the automotive industry’s Q200 test standard.
By TDK Corporation 58
Murata's ceramic chips offer better reliability, electrical performance, and allow design engineers to downsize designs with various package options.
By Murata Electronics 184
Bourns PortNote® solution illustrates how a polymer PTC can protect the DC bus during short circuit testing as recommended by USB 3.1 Section 11.4.1.1.1.
By Bourns Inc. 75
MikroElektronika MikroBUS™ click boards are plug-in play solutions designed to revolutionize the way users add new functionality to development boards.
By MikroElektronika 83
The APM self-sealing nuts seal to 20,000 psi and fasten where gas or liquids are present or under pressure.
By APM Hexseal 190
APM Hexseal's push-button boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
By APM Hexseal 209
APM Hexseal's E-SEEL® rocker switch boots are molded from RUBRGLAS™ and feature a continuous sealing rib at their base to fully enclose the switch bezel.
By APM Hexseal 202
APM Hexseal's stainless-steel bushing seal was designed to control potential leakage with its bonded silicone exterior.
By APM Hexseal 200
APM Hexseal's self-sealing screws are designed to seal to 20,000 psi and are reusable and compatible with all surface finishes.
By APM Hexseal 195
APM Hexseal's rotary shaft seals for potentiometers feature a molded in mounting-nut and choice of IP66/68 rated models.
By APM Hexseal 197
APM Hexseal's SEELOC®, high-pressure washers are easy to install and their uniformity and high strength assure repeatable performance.
By APM Hexseal 175
APM Hexseal's toggle switch boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
By APM Hexseal 174
The 100020 series from Littelfuse is compliant with the 20 A rated current and 600 V rated voltage application requirement for 5 mm x 20 mm fuses.
By Littelfuse Inc 160
Techflex introduces their Flexo® anti-stat conductive carbon infused nylon which is designed for static protection and shielding in the most sensitive applications.
By Techflex 80
3M's Scotch® grounding braid is a flat, tin-plated copper braid conductor offering low electrical resistance connections and strain relief.
By 3M 190
Vishay Semiconductor Optoelectronics' optical sensors, optocouplers, solid-state relays, and MOSFET driver models streamline the design of optoelectronics.
By Vishay Semiconductor / Opto Division 99