Damage to electronic devices is caused by static electricity from people. Connecting people to ground directs static electricity away from devices.
By SCS 286
SCS' 2209 disposable wrist strap meets the ANSI/ESD S20.20 wrist strap system required limit tested per ESD TR53, providing cost effective personnel grounding.
By SCS 223
SCS' air ionizers are self-contained, ionized air blowers designed to neutralize electrostatic charges from non-conductive objects and isolated conductors.
By SCS 295
SCS' smocks are designed to be antistatic, low turbocharging, and create a Faraday Cage around the torso and arms of the wearer to protect ESD susceptible items from electrostatic fields gener
By SCS 250
SCS' transparent metal-in static shielding bags are designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol, and a lo
By SCS 194
SCS’ 2300R series metallized static shielding bag with closed cell air-cushion protection layers provides lightweight ESD protective packaging.
By SCS 170
The SCS Iron Man™ Plus workstation monitors a voltage level that is being generated on a printed circuit board while working on it.
By SCS 194
The SCS 770075 WSMONITOR2 plus workstation monitor uses a solid-state capacitance design to continuously test the ground integrity of two operators and one worksurface, thus eliminating the need f
By SCS 298
SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Progra
By SCS 310
SCS features their R3 dissipative rubber worksurface mats which are static-safe work surfaces that is resistant to solvents, hot solder, and soldering irons.
By SCS 220
SCS' verification tester is used to perform periodic test limit verification for the SCS workstation and portable monitors.
By SCS 337
SCS' dual-wire static control smocks protect ESD susceptible items by creating a Faraday cage around the torso and arms of the wearer.
By SCS 229
The SCS 8900 series of dissipative rubber mats and rolls meet ANSI/ESD S20.20 required limit and the recommendation of work surface standard ANSI/ESD S4.1.
By SCS 196
The SCS WSMONITOR2 Plus verification tester can verify calibration of the WSMONITOR2 Plus workstation monitor in-house without removing it from its workstation.
By SCS 184
The SCS resistance pro meter is an instrument designed to measure resistance point-to-point (Rtt) or surface-to-ground (Rtg).
By SCS 239
SCS offers a comprehensive line of products for ESD management products including wrist straps, table mats, shielding bags, and more.
By SCS 299
SCS's 497AJH HEPA vacuum is designed for removing 99.97% of 0.3 micron diameter particles from hazardous material, toner, dust, and more.
By SCS 300