Littelfuse's SPD2 series of surge protection devices (SPDs) are designed for equipment protection from transient overvoltage events.
By Littelfuse Inc 830
Bourns® dual-channel TBU® HSPs protect against faults caused by short circuits, overvoltage transients, and faults in battery cells up to rated limits.
By Bourns Inc. 912
Littelfuse’s HEV series of high voltage power fuses are designed for use in the hybrid and electric vehicles and in industrial circuits.
By Littelfuse Inc 1229
Littelfuse's SP4203 integrates low-capacitance diodes to provide electronic equipment protection from destructive electrostatic discharges (ESD).
By Littelfuse Inc 1310
The Bourns® model SM8S-Q for surge and ESD protection applications are available in a compact chip package DO-218 size format.
By Bourns Inc. 972
Littelfuse's SP1333 series diodes provide symmetrical data line protection from ESDs up to ±30 kV and tolerate surges >5 A for extended operating life.
By Littelfuse Inc 1120
The Bourns® GMOV™ hybrid overvoltage protection component combines a metal oxide varistor and a gas discharge tube with patented space-saving FLAT® technology.
By Bourns Inc. 1923
Panasonic's 14 mm radial-leaded disc ZNR® transient/surge absorbers feature the same outstanding performance and lead spacing as its 20 mm counterparts.
By Panasonic 1089
Bourns offers 8 V and 6 V rated model MF-FSML/X series of low resistance surface mount polymer positive temperature coefficient (PPTC) resettable fuses.
By Bourns Inc. 1062
Bourns’ MF-GSMF series polymer PTC resettable fuses have a higher voltage (36 VDC) and hold current (3.0 A) ratings with initial resistance as low as 0.01 ohm.
By Bourns Inc. 1501
Littelfuse's SP3400 integrates two channels of low capacitance steering diodes to protect electronic equipment.
By Littelfuse Inc 1062
Littelfuse's AQ24CANA series TVS diode array is designed for general purpose ESD protection and is ideal for automotive applications.
By Littelfuse Inc 1214
Littelfuse's 456SD Series NANO² fuse is a small sized, surface-mountable high current fuse which provides surge current protection.
By Littelfuse Inc 1004
Littelfuse's SIDACtor high-power 100 A, 6 V protection thyristor PxxxxS4xLRP series is used to protect equipment from damaging overvoltage transients.
By Littelfuse Inc 727
Littlefuse’s SP1305 series TVS diode array 30 kV ESD protection for industrial equipment.
By Littelfuse Inc 1009
Littelfuse’s SP3208 and SP3213 series provide a lower nominal capacitance, which helps preserve signal integrity and minimize data loss.
By Littelfuse Inc 1024
Stackpole Electronics’ ZV series is surface-mount multilayer varistor technology designed to protect board level components from transient events.
By Stackpole Electronics, Inc. 1210
Littelfuse integrates rail-to-rail diodes with an additional Zener diode built in to help protect I/O pins from ESD and high surge events.
By Littelfuse Inc 1118
Littelfuse's Nano2 881F series is a faster opening version of the 881 series, enhancing the protection of products from overload and short circuit events.
By Littelfuse Inc 892
Littelfuse’s AQHVxx-01LTG and AQHVxx-01LTG-C series automotive 250 W diode arrays protect equipment from damage due to ESD, EFT, and other high surge overvoltage transients.
By Littelfuse Inc 643