Renesas

Features integrated noise reduction between 50 to 60 Hz and a resolution of 16-bit ADC for applications such as mobile devices and computers.

Intersil's ISL29125 RGB sensors are digital red, green, and blue color light sensors with IR blocking filters.

Features a fully-encapsulated, step-down switching power supply that can deliver up to 100 W output power from a small 17 mm square PCB footprint.

Features IEC61000 ESD protection on RS-485 IO pins: ±5 kV and up to 65 mV hysteresis for improved noise immunity.

Ideal for low noise instrumentation systems by providing amplification before 24-bit delta sigma ADCs.

A high efficiency, monolithic, synchronous step-down DC/DC converter that can deliver up to 6 A continuous output current from a 2.7 V to 5.5 V input supply.

Intersil's ISL8023 and ISL8024 are highly efficient, monolithic, synchronous step-down DC/DC converters.

ZL8800 supports a wide range of output voltages (0.54 V to 5.5 V) operating from input voltages as low as 4.5 V up to 14 V.

This synchronous buck converter operates from a 4.5 V to 14 V input supply and provides from 0.54 V to 5.5 V output voltage at up to 6 A.

The ISL8203M is a complete power system in a small 9 mm x 6.5 mm QFN package.

Intersil's ISL8002B is a synchronous step-down DC/DC converter that can deliver up to 2 A of continuous output current from a 2.7 V to 5.5 V input supply.

Intersil's ISL28023/25 is a bi-directional, high-side and low-side, digital current sense and voltage monitor with a serial interface.

Intersil's ISL8117 is a synchronous buck controller to generate POL Voltage rails and bias voltage rails for a wide variety of applications in industrial segments.

Intersil’s ISL3159E is a ±15kV IEC61000 ESD protected, 5V powered, single transceiver that meets both the RS-485 and RS-422 standards for balanced communication.

Intersil’s ISL3179E and ISL3180E are high ESD Protected, 3.3 V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication.

The Intersil ISL80505/10 is a single-output low-dropout voltage regulator (LDO) capable of sourcing up to 500 mA or 1 A output current.

The Intersil ISL80030 and ISL80031 are highly efficient, monolithic, synchronous stepdown DC/DC converters that can deliver 3 A of continuous output current from a 2.7 V to 5.5 V input supply.

The Intersil ISL8018 is a high efficiency, monolithic, synchronous step-down DC/DC converter that can deliver up to 8 A continuous output current from a 2.7 V to 5.5 V input supply.

Intersil's ISL94203 is a Li-ion battery monitor IC that supports from three to eight series-connected cells.

Intersil's ISL78227/9 are AEC-Q100 Grade 1, 2-phase 55 V synchronous boost controllers intended to simplify the design of high power boost applications.