TRINAMIC Motion Control's optical rotary encoders for stepper motor servos supply sufficient torque at low speed.
By TRINAMIC Motion Control GmbH 227
Complete microstepping driver ICs from TRINAMIC include a high-resolution indexer DAC that helps to create smooth, quiet operation, and positioning.
By TRINAMIC Motion Control GmbH 233
TRINAMIC's TMCM-1043 step/direction driver board provides motor control via step and direction signals, which can be controlled by a PLC or an external controller board.
By TRINAMIC Motion Control GmbH 216
TRINAMIC's TMC429 miniature motor controllers can control up to three motors with high performance while saving energy and costs.
By TRINAMIC Motion Control GmbH 339
TRINAMIC's TMC5031 is a tiny IC with sophisticated ramp-generators and two power stages that help quicken time to market while saving money and space.
By TRINAMIC Motion Control GmbH 240
TRINAMIC's TMCM-3110 is a compact, three-axes stepper motor controller/driver module for two-phase bipolar stepper motors.
By TRINAMIC Motion Control GmbH 208
TRINAMIC's TMCM-1043 kit is pre-configured and pre-programed and is designed to be used with MCM-1043 stepper motor driver.
By TRINAMIC Motion Control GmbH 294
TRINAMIC's TMC5130 ICs enable superior control of stepper motors and are cost efficient and easy-to-use.
By TRINAMIC Motion Control GmbH 202
TRINAMIC introduces the TMC21x0 family with extremely silent stepper motor driver, including: stallGuard2, coolStep and dcStep, and one additional SPI interface.
By TRINAMIC Motion Control GmbH 266
TRINAMIC’s 3-Phase chipset is designed for, high current BLDC and PMSM Servo drives, pumps, blowers at lowest boardspace.
By TRINAMIC Motion Control GmbH 204
TRINAMIC's dual-axis stepper integrated controller driver IC family are powerful systems-on-a-chip, integrating sophisticated ramp-generators and two power stages.
By TRINAMIC Motion Control GmbH 266
TRINAMICs motor drivers are designed to be the easiest to use and best performing motor drivers on market.
By TRINAMIC Motion Control GmbH 240
TRINAMIC’s TMC8460 incorporates PWM and Step/Dir I/O peripherals that do not require routing through the firmware of an application processor.
By TRINAMIC Motion Control GmbH 222
Hamburg-based manufacturer TRINAMIC motion control is introducing an additional product-family, named motionCookies.
By TRINAMIC Motion Control GmbH 199
TRINAMIC introduces their dedicated stepper motor servo controller IC that makes development of closed loop stepper systems easier than ever with proven reliability.
By TRINAMIC Motion Control GmbH 244
TMC2208 are cost-friendly stepper motor drivers from TRINAMIC use stealthChop technology to eliminate noise levels at low speeds.
By TRINAMIC Motion Control GmbH 331
TRINAMIC's FOC controller chip keeps development times of precise and efficient servo controllers to a minimum.
By TRINAMIC Motion Control GmbH 220
TRINAMIC's TMC2041 dual-axis stepper motor driver IC with integrated MOSFET power switches delivers 1.5 A (peak) at 26 V supply voltage per motor.
By TRINAMIC Motion Control GmbH 305
TRINAMIC Motion Control's open source BOBs for their chips transform digital information into physical motion.
By TRINAMIC Motion Control GmbH 295
TRINAMIC's TMC5160 controller/driver IC offers complete motion controlling features, powerful external MOSFET driver stages, and high quality current regulation.
By TRINAMIC Motion Control GmbH 251