Maxim’s DS28E17 is a 1-wire slave to I²C master bridge device that interfaces directly to I²C slaves at standard (100 kHz max) or fast (400 kHz max).
By Maxim Integrated 956
Linear Technology's LTC2937 is a six-channel power supply sequencer and voltage supervisor.
By Analog Devices Inc 650
Maxim's MAX17509 integrates two 3 A internal switch step-down regulators with programmable features.
By Maxim Integrated 955
Maxim's MAX44211 is a low-distortion line driver customized for PLC applications where high output current is needed to drive the isolation / coupling transformer.
By Maxim Integrated 1075
Maxim's MAX11301 integrates a PIXI, 12-bit, multichannel, ADC and a 12-bit, multichannel, buffered digital-to-analog converter in a single integrated circuit.
By Maxim Integrated 937
Linear Technology's LT6657 is a precision voltage reference that combines robust operating characteristics with extremely low drift and low noise.
By Analog Devices Inc 595
Diodes' AH2985 includes a Hall-effect sensor, dynamic offset correction and two complementary open-drain output drivers with internal Zener diode protection.
By Diodes Incorporated 770
Diodes' AP91352 is a self-protected resettable electronic fuse designed for consumer applications such as hard-disk drives and industrial applications.
By Diodes Incorporated 672
Vishay Dale's power-pole printed circuit assembly (PCA) provides a reconfigurable totem-pole circuit to conduct several experiments in the Power Electronics Lab.
By Vishay/Dale 2024
Diodes' APR34150 combine an N-MOSFET with an optimized driver circuit for synchronous rectification (SR).
By Diodes Incorporated 650
Diodes' AP3127/H current mode PWM controllers are optimized for high-performance and cost-effective quick charge application systems.
By Diodes Incorporated 742
The ON Semiconductor MatrixCam™ video development kit (VDK) is a smart low power, 1080P camera solution that streams video over Wi-Fi and Ethernet.
By ON Semiconductor 858
All ON Semiconductor automotive products are qualified according to the automotive electronics council (AEC) reliability test requirements (AEC-Q100, AEC-Q101).
By ON Semiconductor 985
ROHM's BD71805MWV utilizes power supply technology cultivated for mobile applications to optimize circuit configuration for the i.MX 6SoloLite processor.
By ROHM Semiconductor 791
Toshiba has expanded their lineup of MOSFETs with the launch of their SSM3K35CTC and SSM3J35CTC in a compact, 0.8 mm × 0.6 mm, CST3C package.
By Toshiba Semiconductor and Storage 1348
Texas Instruments' UCC27714 is a 600 V high- and low-side gate driver with 4 A source and sink current capability, targeted to drive power MOSFETs or IGBTs.
By Texas Instruments 717
Texas Instruments' TPS6305x family of devices are buck-boost converters, suitable for applications where the input voltage is higher or lower than the output.
By Texas Instruments 497
Texas Instruments' CSD87334Q3D NexFET™ power block is an optimized design for synchronous buck and boost applications in a small 3.3 mm × 3.3 mm outline.
By Texas Instruments 583
Texas Instruments' CSD19537Q3 100 V, 12.1 mΩ, SON 3.3 mm × 3.3 mm NexFET™ power MOSFET is designed to minimize losses in power conversion applications.
By Texas Instruments 634
Texas Instruments' DRV10963 motor drivers are specifically designed for high efficiency, low noise, and low external component count motor drive applications.
By Texas Instruments 785