AVX's F72 solid tantalum electrolytic capacitors and F75 series maximum CV solid tantalum electrolytic capacitors are conformal coated chip capacitors.
By AVX Corporation 970
AVX’s TACmicrochip® standard and low-profile tantalum microchip capacitors offer high energy storage in a small case size down to 0402.
By AVX Corporation 779
KEMET's polyethylene naphthalate film capacitor for surface mounting boasts wide VDC/VAC ratings and high temperature service and meets AEC-200 requirements.
By KEMET 1471
AVX’s T4Z series HRC4000 medical grade solid tantalum capacitors are designed for use in non-critical medical applications.
By AVX Corporation 909
AVX’s F93 and F93-AJ6 series are resin-molded chips that come in four different case sizes (A, B, C, and N).
By AVX Corporation 943
Eaton XT series supercapacitors are unique, ultra-high capacitance devices utilizing electrochemical double layer capacitor (EDLC) construction.
By Eaton-Electronics Division 1063
Littelfuse’s LPWI series thin film power inductors offer compact, low-profile dimensions with low losses and high efficiency for power applications.
By Littelfuse Inc 1262
The Bourns® SRN5020TA/SRN5040TA inductors are suited for DC/DC converters and power supplies where higher inductor reliability may be required.
By Bourns Inc. 927
WIMA's SMD-PPS film capacitors with capacitances from 0.01 mF to 2.2 mF are produced with the proven box technology.
By WIMA 2238
KEMET's TPI series ferrite core inductors flat wire, one-turn through the construction design enables high efficiency at large currents.
By KEMET 1403
Vishay BC Components' 715 series capacitors are specifically designed to function in circuits with high peak current and high repetition rates.
By Vishay/BCcomponents 1322
Panasonic’s EEU-FP series capacitors are capable of up to 2.5 times the ripple current and 60% larger capacitance than existing similar case size capacitors.
By Panasonic 1190
WIMA SMD series is produced with the proven box technology and covers almost the entire application range of conventional through-hole plastic film capacitors.
By WIMA 2017
KEMET's KONNEKT™ U2J MLCC is a surface mountable, leadless, multi-chip solution suitable for high-efficiency and high-density power applications.
By KEMET 1416
Wurth Electronics’ WCAP-CSST soft termination MLCC capacitors have resistant and robust performance during PCB handling.
By Würth Elektronik 798
Wurth Electronics’ WCAP-CSRF radio frequency MLCCs are NP0 Class I MLCCs for high frequency and antenna matching.
By Würth Elektronik 920
Panasonic's EEH-ZS series surface mount conductive polymer hybrid aluminum capacitors are capable of operating at high temperatures.
By Panasonic 1215
TDK's VLS-EX-H series power inductors are magnetically-shielded wirewound inductors with a ferrite core, designed for use in automotive applications.
By TDK Corporation 846
TDK's SPM-VT-D series wire wound inductors were designed and optimized for use in automotive applications.
By TDK Corporation 829
The RLS series ranges in size from 3.9 µH to 100 µH and has been tested and approved to work specifically with RECOM DC/DC modules.
By RECOM Power 1373