BEI Sensors’ optical isolator modules provide a robust output to receiving electronics, helping eliminate ground loops and reduce signal degradation.
By Sensata Technologies – BEI Sensors 1412
Maxim's low-capacitance ±15 kV ESD-protection diode arrays are available in 4-bump WLP, 6-bump WLP, 9-bump WLP, 6-pin TDFN, and 12-pin TQFN packages.
By Maxim Integrated 1090
Si826x opto driver devices use much less input turn-on current, and have an improved pulse-width distortion and propagation delay.
By Silicon Labs 1723
MCC's 1000 mW Zener diodes in SOD-123 package with bonding structure offer low Zener impedance and low inductance.
By Micro Commercial Co 1721
The 10 A, 45 V Schottky rectifiers offer low thermal resistance and high-forward surge current capability in a TO-277B low body profile package.
By Micro Commercial Co 1891
STMicroelectronics offers a large number of rectifiers that meet AEC-Q101 standards as well as strict international automotive quality requirements.
By STMicroelectronics 1025
A digital driver family with an optimal configuration, package, and footprint for a variety of opto-driver products.
By Silicon Labs 1067
Diodes' ZXTR1005K4 and ZXTR1005PD8 help minimize circuit footprint while providing a fixed output and a high drive capability.
By Diodes Incorporated 438
Vishay FRED Pt® rectifiers have low forward voltage drop, low leakage current, and an ultrafast recovery time.
By Vishay Semiconductor/Diodes Division 1300
TI's ISO7310C series of digital isolators have an integrated noise filter for applications located in harsh environments.
By Texas Instruments 1036
Texas Instruments' TPD1S514 single-chip protection solution for the USB VBUS line or other power buses has bidirectional nFET switch ensures safe current flow.
By Texas Instruments 667
Infineon's HITFET family provides a higher-level of protection with over-temperature, short circuit, over-current, over-voltage, and ESD.
By Infineon Technologies 951
Analog Devices' ADuM3150 and ADuM4150 are 3.75 kV and 5 kVRMS, 6-channel SPIsolator™ digital isolators, optimized for isolated serial peripheral interfaces (SPIs).
By Analog Devices Inc 627
TI's ISO7842 digital isolators have a signaling rate up to 100 MBps, a wide supply range of 2.25-5.5 V, and has low power consumption.
By Texas Instruments 779
Texas Instruments' ISO7821 is a high-performance, dual-channel digital isolator with 5.7 kVRMS isolation voltage per UL 1577.
By Texas Instruments 910
Diodes' US1JDF-13 / US1MDF-13 / US2JDF-13 D-FLAT high voltage rectifier series.
By Diodes Incorporated 586
1SMB59xxB series of Zener diodes from Diodes Incorporated comprises a range of 42 power Zener diodes, with voltages from 3.3 V to 200 V.
By Diodes Incorporated 1041
Silicon Labs' Si88xx family of products combine high-speed digital isolators with an isolated power supply. The Si88xx evaluation kit is also available.
By Silicon Labs 1226
Maxim's MAX14934/35 Four-Channel, 5 kV RMS digital isolators are the industry's fastest and most flexible isolators allowing direct interfacing.
By Maxim Integrated 903
Toshiba's variety of small package 30 V / 40 V Schottky barrier diodes that provide between 0.2 A and 1.5 A.
By Toshiba Semiconductor and Storage 1105