Desco’s Chargebuster overhead ionizers are steady-state DC ionizers designed for use in ESD-protected areas. These include 700 lumen light panels that provide additional illumination to work areas to help improve visibility and productivity. They are available in two-fan, one-light, and three-fan, two-light configurations.
Features
- Three seconds or less discharge time with ±10 V offset voltage (balance)
- Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53
- Three-position fan speed: low, medium, and high
- Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
- Sealed plenum airflow
- Prevents contamination from being introduced to the workstation
- Auto-feedback system (audible and visual alarm through single tri-color LED)
- Unit will automatically shut down and alarm if supply voltage drops
- 120/220 VAC input voltage selectable (Please refer to the datasheet for specific instructions for verifying and resetting the voltage by qualified personnel only.)
- Unit can be used with 110 V or 220 V power sources
- Replaceable emitter pins
- Field replaceable emitter pins allow for minimal downtime
- NIST calibrated
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology