 |  |  | |
| PartNumber | ADM693AANZ | ADM693AARN | ADM693AAN |
| Description | Supervisory Circuits IC 5V MPU Battery Mgmt | Supervisory Circuits 5V CMOS I.C. | IC SUPERVISOR MPU 4.4V WD 16DIP |
| Manufacturer | Analog Devices Inc. | Analog Devices Inc. | Analog Devices Inc. |
| Product Category | Supervisory Circuits | PMIC - Supervisors | PMIC - Supervisors |
| RoHS | Y | - | - |
| Type | Voltage Supervisory | Battery Backup Circuit | Battery Backup Circuit |
| Mounting Style | Through Hole | SMD/SMT | - |
| Package / Case | PDIP-16 | - | - |
| Threshold Voltage | 4.4 V | 4.4 V | - |
| Number of Inputs Monitored | 1 Input | 1 Input | - |
| Output Type | Open Drain, Push-Pull | Open Drain Push-Pull | - |
| Manual Reset | No Manual Reset | No Manual Reset | - |
| Watchdog Timers | Watchdog | Watchdog | - |
| Battery Backup Switching | Backup | Backup | - |
| Reset Delay Time | 280 ms | 280 ms | - |
| Supply Voltage Max | 5.5 V | - | - |
| Minimum Operating Temperature | - 40 C | - 40 C | - |
| Maximum Operating Temperature | + 85 C | + 85 C | - |
| Series | ADM693A | ADM693A | - |
| Packaging | Tube | Tube | Tube |
| Height | 4.95 mm (Max) | - | - |
| Length | 21.33 mm (Max) | - | - |
| Width | 7.11 mm (Max) | - | - |
| Brand | Analog Devices | - | - |
| Overvoltage Threshold | 4.5 V | 4.5 V | - |
| Undervoltage Threshold | 4.25 V | 4.25 V | - |
| Chip Enable Signals | Chip Enable | Chip Enable | - |
| Operating Supply Current | 100 uA | 100 uA | - |
| Pd Power Dissipation | 842 mW | - | - |
| Power Fail Detection | Yes | Yes | - |
| Product Type | Supervisory Circuits | - | - |
| Factory Pack Quantity | 25 | - | - |
| Subcategory | PMIC - Power Management ICs | - | - |
| Supply Voltage Min | 4.5 V | - | - |
| Unit Weight | 0.057419 oz | 0.023492 oz | - |
| Package Case | - | SOIC-16 | 16-DIP (0.300", 7.62mm) |
| Operating Temperature | - | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Mounting Type | - | Surface Mount | Through Hole |
| Supplier Device Package | - | 16-SOIC | 16-PDIP |
| Output | - | Open Drain, Push-Pull | Open Drain, Push-Pull |
| Reset | - | Active High/Active Low | Active High/Active Low |
| Number of Voltages Monitored | - | 1 | 1 |
| Reset Timeout | - | 140 ms Minimum | 140 ms Minimum |
| Voltage Threshold | - | 4.4V | 4.4V |
| Pd Power Dissipation | - | 700 mW | - |
| Supply Voltage Max | - | 5.5 V | - |
| Supply Voltage Min | - | 4.5 V | - |