LT1076IT-5#PBF

LT1076IT-5#PBF
Mfr. #:
LT1076IT-5#PBF
Produttore:
Analog Devices / Linear Technology
Descrizione:
Switching Voltage Regulators 2A Step-Down Switching Reg
Ciclo vitale:
Nuovo da questo produttore.
Scheda dati:
LT1076IT-5#PBF Scheda dati
Consegna:
DHL FedEx Ups TNT EMS
Pagamento:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
LT1076IT-5#PBF DatasheetLT1076IT-5#PBF Datasheet (P4-P6)LT1076IT-5#PBF Datasheet (P7-P8)
ECAD Model:
Maggiori informazioni:
LT1076IT-5#PBF maggiori informazioni
Attributo del prodotto
Valore attributo
Produttore:
Analog Devices Inc.
Categoria di prodotto:
Regolatori di tensione a commutazione
RoHS:
Y
Stile di montaggio:
Foro passante
Pacchetto/custodia:
TO-220-5
Tensione di uscita:
5 V
Corrente di uscita:
1.6 A
Numero di uscite:
1 Output
Tensione di ingresso MASSIMA:
45 V
Topologia:
secchio
Tensione di ingresso MIN:
7.3 V
Frequenza di commutazione:
100 kHz
Temperatura di esercizio minima:
- 40 C
Temperatura massima di esercizio:
+ 85 C
Serie:
LT1076-5
Confezione:
Tubo
Altezza:
4.57 mm
Tensione di ingresso:
8 V to 60 V
Intervallo operativo di temperatura:
- 40 C to + 85 C
Corrente di riposo:
8.5 mA
Tipo:
Regolatore di commutazione bipolare
Marca:
Dispositivi analogici/Tecnologia lineare
Spegnimento:
Spegnimento
Corrente di alimentazione operativa:
8.5 mA
Tipologia di prodotto:
Regolatori di tensione a commutazione
Quantità confezione di fabbrica:
50
sottocategoria:
PMIC - CI di gestione dell'alimentazione
Tensione di alimentazione - Min:
8 V
Tags
LT1076IT-5, LT1076IT, LT1076I, LT1076, LT107, LT10, LT1
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***ear Technology
LT1076-5 - 5V Step-Down Switching Regulator
***p One Stop Japan
Conv DC-DC Single Step Down 7.3V to 45V 5-Pin(5+Tab) TO-220
***ponent Distributors Inc.
2A Step-Down Switching Reg
***i-Key
IC REG MULTI CONFG 5V 2A TO220-5
***ark
Ic,Smps Controller,Current-Mode,Bipolar,Zip,5Pin,Plastic
***hardson RFPD
DC TO DC CONVERTER
***log Devices
The LT1076-5 is a 2A fixed 5V output monolithic bipolar switching regulator which requires only a few external parts for normal operation. The power switch, all oscillator and control circuitry, all current limit components, and an output monitor are included on the chip. The topology is a classic positive “buck” configuration but several design innovations allow this device to be used as a positive-to-negative converter, a negative boost converter, and as a flyback converter. The switch output is specified to swing 40V below ground, allowing the LT1076-5 to drive a tapped inductor in the buck mode with output currents up to 4A. The LT1076-5 uses a true analog multiplier in the feedback loop. This makes the device respond nearly instantaneously to input voltage fluctuations and makes loop gain independent of input voltage. As a result, dynamic behavior of the regulator is significantly improved over previous designs. On-chip pulse by pulse current limiting makes the LT1076-5 nearly bust-proof for output overloads or shorts. The input voltage range as a buck converter is 8V to 60V, but a self-boot feature allows input voltages as low as 5V in the inverting and boost configurations. The LT1076-5 is available in a low cost 5- and 7-lead TO-220 packages with frequency pre-set at 100kHz and current limit at 2.6A. See Application Note 44 for design details. Applications 5V Output Buck Converter Tapped Inductor Buck Converter with 4A Output at 5V Positive-to-Negative Converter
Power Management ADI SLP
Immagine Parte # Descrizione
LT1677CS8#PBF

Mfr.#: LT1677CS8#PBF

OMO.#: OMO-LT1677CS8-PBF

Precision Amplifiers L N, R2R Prec Op Amp
AD780BRZ

Mfr.#: AD780BRZ

OMO.#: OMO-AD780BRZ

Voltage References 2.5V/3V Ultrahigh Prec Bandgap
IRLML2502TRPBF

Mfr.#: IRLML2502TRPBF

OMO.#: OMO-IRLML2502TRPBF

MOSFET MOSFT 20V 4.2A 45mOhm 8nC Log Lvl
IRLL2705TRPBF

Mfr.#: IRLL2705TRPBF

OMO.#: OMO-IRLL2705TRPBF

MOSFET MOSFT 55V 3.8A 40mOhm 32nC Log Lvl
HZ0805E601R-10

Mfr.#: HZ0805E601R-10

OMO.#: OMO-HZ0805E601R-10

Ferrite Beads 600ohms 100MHz .5A Monolithic 0805 SMD
5002

Mfr.#: 5002

OMO.#: OMO-5002

Circuit Board Hardware - PCB TEST POINT WHITE .040
IRLL2705TRPBF

Mfr.#: IRLL2705TRPBF

OMO.#: OMO-IRLL2705TRPBF-INFINEON-TECHNOLOGIES

MOSFET N-CH 55V 3.8A SOT223
IRLML2502TRPBF

Mfr.#: IRLML2502TRPBF

OMO.#: OMO-IRLML2502TRPBF-INFINEON-TECHNOLOGIES

MOSFET N-CH 20V 4.2A SOT-23
22-10-2061

Mfr.#: 22-10-2061

OMO.#: OMO-22-10-2061-MOLEX

Headers & Wire Housings VERT PCB HDR 6P GOLD PLATING
HZ0805E601R-10

Mfr.#: HZ0805E601R-10

OMO.#: OMO-HZ0805E601R-10-LAIRD-TECHNOLOGIES

EMI Filter Beads, Chips & Arrays 600ohms 100MHz .5A Monolithic 0805 SMD
Disponibilità
Azione:
106
Su ordine:
2089
Inserisci la quantità:
Il prezzo attuale di LT1076IT-5#PBF è solo di riferimento, se si desidera ottenere il prezzo migliore, inviare una richiesta o inviare un'e-mail diretta al nostro team di vendita [email protected]
Prezzo di riferimento (USD)
Quantità
Prezzo unitario
est. Prezzo
1
11,74 USD
11,74 USD
25
7,80 USD
195,00 USD
100
6,44 USD
644,00 USD
250
6,12 USD
1 530,00 USD
500
5,98 USD
2 990,00 USD
1000
5,75 USD
5 750,00 USD
Iniziare con
Prodotti più recenti
  • SABER Power Diodes and Rectifiers Solution
    SABERs from WeEn utilizes state-of-the-art technology which boosts overall system reliability and power efficiency.
  • Compare LT1076IT-5#PBF
    LT1076IT vs LT1076IT06PBF vs LT1076ITPBF
  • mEZ DC/DC Plug-and-Play Power Module Solutions
    MPS Monolithic Power Systems launches its mEZ DC/DC plug-and-play power module solutions which eliminate the need for design work.
  • W25 SpiFlash® Series
    Winbond's W25X and W25Q SpiFlash® multi-I/O memories feature the popular serial peripheral interface (SPI), densities from 512 K-bit to 512 M-bit, small erasable sectors and the industry&
  • MP2456 Step-Down Converter
    The Monolithic Power Systems MP2456 0.5 A monolithic, step-down, switch-mode converter with a built-in MOSFET requires a minimum number of external components.
  • WA04P Series Attenuators
    Walsin Technology Corporation introduces their WA04P series chip attenuators designed to satisfy most radio frequency applications for wireless devices.
Top