LT1076CR#PBF

LT1076CR#PBF
Mfr. #:
LT1076CR#PBF
Produttore:
Analog Devices / Linear Technology
Descrizione:
Switching Voltage Regulators 2A Step-Down Switching Reg
Ciclo vitale:
Nuovo da questo produttore.
Scheda dati:
LT1076CR#PBF Scheda dati
Consegna:
DHL FedEx Ups TNT EMS
Pagamento:
T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:
LT1076CR#PBF DatasheetLT1076CR#PBF Datasheet (P4-P6)LT1076CR#PBF Datasheet (P7-P9)LT1076CR#PBF Datasheet (P10-P12)LT1076CR#PBF Datasheet (P13-P15)LT1076CR#PBF Datasheet (P16)
ECAD Model:
Maggiori informazioni:
LT1076CR#PBF maggiori informazioni
Attributo del prodotto
Valore attributo
Produttore:
Analog Devices Inc.
Categoria di prodotto:
Regolatori di tensione a commutazione
RoHS:
Y
Stile di montaggio:
Foro passante
Pacchetto/custodia:
DDPAK-7
Tensione di uscita:
2.5 V to 50 V
Corrente di uscita:
1.6 A
Numero di uscite:
1 Output
Tensione di ingresso MASSIMA:
45 V
Topologia:
secchio
Tensione di ingresso MIN:
7.3 V
Frequenza di commutazione:
100 kHz
Temperatura di esercizio minima:
0 C
Temperatura massima di esercizio:
+ 70 C
Serie:
LT1076
Confezione:
Tubo
Altezza:
4.57 mm
Tensione di ingresso:
8 V to 60 V
Intervallo operativo di temperatura:
0 C to + 70 C
Corrente di riposo:
8.5 mA
Tipo:
Regolatore di commutazione bipolare
Marca:
Dispositivi analogici/Tecnologia lineare
Spegnimento:
Spegnimento
Corrente di alimentazione operativa:
8.5 mA
Tipologia di prodotto:
Regolatori di tensione a commutazione
Quantità confezione di fabbrica:
50
sottocategoria:
PMIC - CI di gestione dell'alimentazione
Tensione di alimentazione - Min:
8 V
Unità di peso:
0.094711 oz
Tags
LT1076CR, LT1076C, LT1076, LT107, LT10, LT1
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***ical
Conv DC-DC 7.3V to 45V Step Down Single-Out 2.5V to 50V 10A 8-Pin(7+Tab) DDPAK Tube
***ear Technology
LT1076 - Step-Down Switching Regulator
***ponent Distributors Inc.
2A Step-Down Switching Reg
***trelec
Switching Regulator DD-7
***i-Key
IC REG MULT CONFG ADJ 2A D2PAK-7
***ukat
Switch. Reg 2A 45Vi D²Pak-7
***Components
Régulateur à découpage Ajustable DDPA
***hardson RFPD
DC TO DC CONVERTER
***ark
SWITCHING REG 2A ADJ, D2-PAK-7; Voltage Regulator Type:Buck, Step Down; Voltage, Input Max:60V; Voltage, Output Max:50V; Output Current Max:2A; Frequency:100kHz; Voltage, Supply Min:8V; Voltage, Supply Max:60V; Termination Type:SMD; ;RoHS Compliant: Yes
***ment14 APAC
Prices include import duty and tax. IC, SWITCHING REG 2A ADJ, D2-PAK-7; Topology:Buck (Step Down); Input Voltage Min:7.3V; Input Voltage Max:45V; No. of Outputs:1Outputs; DC / DC Converter IC Case:TO-263; No. of Pins:7Pins; Output Current:2A; Output Voltage Min:2.5V; Output Voltage Max:50V; Switching Frequency:100kHz; Operating Temperature Max:70°C; Product Range:-; Automotive Qualification Standard:-; RoHS Phthalates Compliant:Yes; MSL:MSL 1 - Unlimited; SVHC:No SVHC (15-Jan-2018); Base Number:1076; Frequency:100kHz; IC Temperature Range:Commercial; Operating Temperature Min:0°C; Operating Temperature Range:0°C to +70°C; Output Current Max:2A; Output Voltage:64V; Primary Input Voltage:60V; Supply Voltage Min:8V; Termination Type:Surface Mount Device; Voltage Regulator Type:Buck, Step Down; Voltage Vcc:45V
***nell
IC,REG. SWITCHING 2A REGOLABILE,D2-PAK-7; Topologia:Buck (Step Down); Tensione di Ingresso Min:7.3V; Tensione di Ingresso Max:45V; No. di Uscite:1Uscite; Formato IC Convertitore CC/CC:TO-263; No. di Pin:7Pin; Corrente di Uscita:2A; Tensione di Uscita Min:2.5V; Tensione di Uscita Max:50V; Frequenza di Commutazione:100kHz; Temperatura di Esercizio Max:70°C; Gamma Prodotti:-; Standard di Qualifica Automotive:-; Livello di Sensibilità all'Umidità (MSL):MSL 1 - Non Limitata; Sostanze Estremamente Preoccupanti (SVHC):No SVHC (15-Jan-2018); Corrente di Uscita Max:2A; Frequenza:100kHz; Intervallo Temperatura CI:Commerciale; Intervallo Temperatura di Esercizio:Da 0°C a +70°C; Numero Base:1076; Temperatura di Esercizio Min:0°C; Tensione Vcc:45V; Tensione di Alimentazione Min:8V; Tensione di Ingresso Primario:60V; Tensione di Uscita:64V; Tipo di Regolatore di Tensione:Buck, Step Down; Tipo di Terminazione:Dispositivo a Montaggio Superficiale
***log Devices
The LT1074 is a 5A (LT1076 is rated at 2A) monolithic bipolar switching regulator which requires only a few external parts for normal operation. The power switch, all oscillator and control circuitry, and all current limit components,are included on the chip. The topology is a classic positive “buck” configuration but several design innovations allow this device to be used as a positive-to-negative converter, a negative boost converter, and as a flyback converter. The switch output is specified to swing 40V below ground, allowing the LT1074 to drive a tapped-inductor in the buck mode with output currents up to 10A. The LT1074 uses a true analog multiplier in the feedback loop. This makes the device respond nearly instantaneously to input voltage fluctuations and makes loop gain independent of input voltage. As a result, dynamic behavior of the regulator is significantly improved over previous designs. On-chip pulse by pulse current limiting makes the LT1074 nearly bust-proof for output overloads or shorts. The input voltage range as a buck converter is 8V to 60V, but a self-boot feature allows input voltages as low as 5V in the inverting and boost configurations. The LT1074 is available in lowcost TO-220 or DD packages with frequency pre-set at 100kHz and current limit at 6.5A (LT1076 =2.6A). A 7-pin TO-220 package is also available which allows current limit to be adjusted down to zero. In addition, full micropower shutdown can be programmed. See Application Note 44 for design details. A fixed 5V output, 2A version is also available. See LT1076-5. Applications Buck Converter with Output Voltage Range of 2.5V to 50V Tapped-Inductor Buck Converter with 10A Output at 5V Positive-to-Negative Converter Negative Boost Converter Multiple Output Buck Converter
Power Management ADI SLP
Immagine Parte # Descrizione
IR2110SPBF

Mfr.#: IR2110SPBF

OMO.#: OMO-IR2110SPBF

Gate Drivers HI LO SIDE DRVR 500V 2A 10ns
L6203

Mfr.#: L6203

OMO.#: OMO-L6203

Motor / Motion / Ignition Controllers & Drivers DMOS Full Bridge
MAX3323EEUE+

Mfr.#: MAX3323EEUE+

OMO.#: OMO-MAX3323EEUE-

RS-232 Interface IC Transceiver For Multidrop Aps
MAX3160CAP+

Mfr.#: MAX3160CAP+

OMO.#: OMO-MAX3160CAP-

RS-422/RS-485 Interface IC 3-5.5V 1uA Tcvr Multiprotocol
HUF75645P3

Mfr.#: HUF75645P3

OMO.#: OMO-HUF75645P3

MOSFET 75a 100V N-Ch UltraFET
MBRS340T3G

Mfr.#: MBRS340T3G

OMO.#: OMO-MBRS340T3G

Schottky Diodes & Rectifiers 3A 40V
MAX4638ESE+

Mfr.#: MAX4638ESE+

OMO.#: OMO-MAX4638ESE-

Multiplexer Switch ICs 8:1 1Ch Low-Voltage Analog MUX
RC0603FR-071ML

Mfr.#: RC0603FR-071ML

OMO.#: OMO-RC0603FR-071ML

Thick Film Resistors - SMD 1M OHM 1%
IR2110SPBF

Mfr.#: IR2110SPBF

OMO.#: OMO-IR2110SPBF-INFINEON-TECHNOLOGIES

Gate Drivers HI LO SIDE DRVR 500V 2A 10ns
HUF75645P3

Mfr.#: HUF75645P3

OMO.#: OMO-HUF75645P3-ON-SEMICONDUCTOR

MOSFET N-CH 100V 75A TO-220AB
Disponibilità
Azione:
188
Su ordine:
2171
Inserisci la quantità:
Il prezzo attuale di LT1076CR#PBF è solo di riferimento, se si desidera ottenere il prezzo migliore, inviare una richiesta o inviare un'e-mail diretta al nostro team di vendita [email protected]
Prezzo di riferimento (USD)
Quantità
Prezzo unitario
est. Prezzo
1
8,85 USD
8,85 USD
25
5,88 USD
147,00 USD
100
5,11 USD
511,00 USD
Iniziare con
Prodotti più recenti
  • SABER Power Diodes and Rectifiers Solution
    SABERs from WeEn utilizes state-of-the-art technology which boosts overall system reliability and power efficiency.
  • mEZ DC/DC Plug-and-Play Power Module Solutions
    MPS Monolithic Power Systems launches its mEZ DC/DC plug-and-play power module solutions which eliminate the need for design work.
  • W25 SpiFlash® Series
    Winbond's W25X and W25Q SpiFlash® multi-I/O memories feature the popular serial peripheral interface (SPI), densities from 512 K-bit to 512 M-bit, small erasable sectors and the industry&
  • Compare LT1076CR#PBF
    LT1076CR vs LT1076CRPBF vs LT1076CRTRPBF
  • MP2456 Step-Down Converter
    The Monolithic Power Systems MP2456 0.5 A monolithic, step-down, switch-mode converter with a built-in MOSFET requires a minimum number of external components.
  • WA04P Series Attenuators
    Walsin Technology Corporation introduces their WA04P series chip attenuators designed to satisfy most radio frequency applications for wireless devices.
Top