OMO ElectronicOMO Electronic
Expand menu
Ciao, accediIl mio account
0 Carrello

ADM1275-1ACPZ

ADM1275-1ACPZ
Mfr. #:
ADM1275-1ACPZ
Produttore:
Analog Devices Inc.
Descrizione:
Hot Swap Voltage Controllers Low volt Positive Hot Swap + Power mon
Ciclo vitale:
Nuovo da questo produttore.
Scheda dati:
ADM1275-1ACPZ Scheda dati
Consegna:
DHL FedEx Ups TNT EMS
Pagamento:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Maggiori informazioni:
ADM1275-1ACPZ maggiori informazioni ADM1275-1ACPZ Product Details
Attributo del prodotto
Valore attributo
Produttore:
Analog Devices Inc.
Categoria di prodotto:
Regolatori di tensione hot-swap
RoHS:
Y
Prodotto:
Controller e interruttori
Limite corrente:
Regolabile
Tensione di alimentazione - Max:
20 V
Tensione di alimentazione - Min:
2.95 V
Corrente di alimentazione operativa:
5 mA
Temperatura di esercizio minima:
- 40 C
Temperatura massima di esercizio:
+ 85 C
Stile di montaggio:
SMD/SMT
Pacchetto/custodia:
LFCSP-20
Confezione:
Vassoio
Rilevamento interruzione di corrente:
sì
Altezza:
0.73 mm
Lunghezza:
5 mm
Serie:
ADM1275
Tipo:
Controller hot-swap
Larghezza:
5 mm
Marca:
Dispositivi analogici
Tensione di ingresso/alimentazione - Max:
20 V
Tensione di ingresso/alimentazione - Min:
2.95 V
Soglia di sovratensione:
Soglia di sovratensione
Soglia di sottotensione:
Soglia di sottotensione
Kit di sviluppo:
EVAL-ADM1275EBZ
Sensibile all'umidità:
sì
Tensione di alimentazione operativa:
2.95 V to 20 V
Tipologia di prodotto:
Regolatori di tensione hot-swap
Quantità confezione di fabbrica:
490
sottocategoria:
PMIC - CI di gestione dell'alimentazione
Tags
ADM1275-1AC, ADM1275-1, ADM1275, ADM127, ADM12, ADM1, ADM
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    S***a
    S***a
    US

    Very good material

    2019-09-16
    R***d
    R***d
    US

    As described. No issues

    2019-04-08
    D***o
    D***o
    UA

    Quality is good, not packed, working capacity is not checked

    2019-04-13
    A***v
    A***v
    RU

    The fee works as it should. The screwdriver turns well. Shipping super, super, super economy. The goods went exactly 4 months. After the current protection is triggered, the board goes into protection and to start it again you need to submit the charger voltage to its output or install it briefly in memory.

    2019-08-11
***ical
Hot Swap Controller 1-CH 20V N-Channel Positive Voltage 20-Pin LFCSP EP Tray
***et
Hot Swap Controller and Digital Power Monitor 20-Pin LFCSP EP
***ource
IC HOT SWAP CTRL PMBUS 20LFCSP
***log Devices
The ADM1275 is a hot-swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current and voltage readback via an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™ interface. The load current is measured using an internal current sense amplifier that measures the voltage across a sense resistor in the power path via the SENSE+ and SENSE− pins. A default limit of 20 mV is set, but this limit can be adjusted, if required, using a resistor divider network from the internal reference voltage to the ISET pin. The ADM1275 limits the current through the sense resistor by controlling the gate voltage of an external N-channel FET in the power path, via the GATE pin. The sense voltage—and, therefore, the load current—is maintained below the preset maximum. The ADM1275 protects the external FET by limiting the time that the FET remains on while the current is at its maximum value. This current limit time is set by the choice of capacitor connected to the TIMER pin. In addition, a foldback resistor network can be used to actively lower the current limit as the voltage across the FET is increased. This helps to maintain constant power in the FET and allows the safe operating area (SOA) to be adhered to in an effective manner. In case of a short-circuit event, a fast internal overcurrent detector responds within 370 ns and signals the gate to shut down. A 1500 mA pull-down device ensures a fast FET response. The ADM1275 features overvoltage and undervoltage protection, programmed using external resistor dividers on the UV and OV pins. A PWRGD signal can be used to detect when the output supply is valid, using the FLB pin to monitor the output. GPO pins can be configured as various output signals that can be asserted when a programmed current or voltage level is reached. The 12-bit ADC can measure the current in the sense resistor, as well as the supply voltage on the SENSE+ pin or the output voltage. A PMBus interface allows a controller to read current and voltage data from the ADC. Measurements can be initiated by a PMBus command. Alternatively, the ADC can run continuously, and the user can read the latest conversion data whenever required. Up to four unique PMBus addresses can be selected, depending on the way that the ADR pin is connected. The ADM1275-1 and ADM1275-3 are available in a 20-lead QSOP and 20-lead LFCSP and have a LATCH pin that can be configured for automatic retry or latch-off when an overcurrent fault occurs. The ADM1275-2 is available in a 16-lead QSOP with latch-off mode only. Applications Power monitoring and control/power budgeting Central office equipment Telecommunication and data communication equipment PCs/servers
Power Management ADI SLP
Parte # Mfg. Descrizione Azione Prezzo
ADM1275-1ACPZ
DISTI # ADM1275-1ACPZ-ND		Analog Devices IncIC HOT SWAP CTRL PMBUS 20LFCSP
RoHS: Compliant
Min Qty: 100
Container: Tray		Temporarily Out of Stock
  • 100:$8.8822
ADM1275-1ACPZ-R7
DISTI # ADM1275-1ACPZ-R7TR-ND		Analog Devices IncIC HOT SWAP CTRL PMBUS 20LFCSP
RoHS: Compliant
Min Qty: 1500
Container: Tape & Reel (TR)		Temporarily Out of Stock
  • 1500:$6.7365
ADM1275-1ACPZ
DISTI # 584-ADM1275-1ACPZ		Analog Devices IncHot Swap Voltage Controllers Low volt Positive Hot Swap + Power mon
RoHS: Compliant		11
  • 1:$11.2300
  • 10:$10.1100
  • 25:$9.5100
  • 50:$8.9400
  • 100:$8.4800
  • 250:$7.9700
  • 500:$7.2400
  • 1000:$6.2000
ADM1275-1ACPZ-R7
DISTI # 584-ADM1275-1ACPZ-R7		Analog Devices IncHot Swap Voltage Controllers Low volt Positive Hot Swap + Power mon
RoHS: Compliant		0
  • 1500:$6.1200
ADM1275-1ACPZAnalog Devices IncPower Supply Support Circuit, Adjustable, 1 Channel, DMOS
RoHS: Compliant		1648
  • 1000:$7.6300
  • 500:$8.0300
  • 100:$8.3600
  • 25:$8.7200
  • 1:$9.3900
Immagine Parte # Descrizione
EVAL-ADM1275EBZ

Mfr.#: EVAL-ADM1275EBZ

OMO.#: OMO-EVAL-ADM1275EBZ

 Power Management IC Development Tools EVAL-ADM1275
EVAL-ADM1275EBZ

Mfr.#: EVAL-ADM1275EBZ

OMO.#: OMO-EVAL-ADM1275EBZ-ANALOG-DEVICES

 ADM1275 Power Supply Controllers and Monitors Evaluation Board
Disponibilità
Azione:
Available
Su ordine:
3500
Inserisci la quantità:
Il prezzo attuale di ADM1275-1ACPZ è solo di riferimento, se si desidera ottenere il prezzo migliore, inviare una richiesta o inviare un'e-mail diretta al nostro team di vendita [email protected]
Prezzo di riferimento (USD)
Quantità
Prezzo unitario
est. Prezzo
1
11,23 USD
11,23 USD
10
10,11 USD
101,10 USD
25
9,51 USD
237,75 USD
50
8,94 USD
447,00 USD
100
8,48 USD
848,00 USD
250
7,97 USD
1 992,50 USD
500
7,24 USD
3 620,00 USD
1000
6,20 USD
6 200,00 USD
A causa della scarsità di semiconduttori dal 2021, il prezzo inferiore è il prezzo normale prima del 2021. Si prega di inviare informazioni per confermare.
Iniziare con
Prodotti più recenti
More Newest Products
Top